Many users assume Windows 10 auto-installs drivers for all USB devices. For the Behringer UM2, Windows will install a generic Microsoft driver labeled "USB Audio Device." While this passes basic audio, it causes three major issues:
While Windows 10 is excellent at finding generic drivers for mice and keyboards, it often struggles with audio interfaces. If you plug the UM2 in without installing the dedicated driver, Windows might try to assign a generic USB audio driver. The result? You might hear audio, but you will likely experience:
Extract the downloaded ZIP file and run the setup for the . Behringer Um2 Driver Download Windows 10 64 Bit
A: Yes, but you will experience sync issues. Better solution: Use the ASIO driver inside your DAW and use VoiceMeeter as the output master.
The Behringer UM2 is a USB Audio Interface. Its primary job is to take analog signals (your voice via a microphone or your guitar) and convert them into digital data that your computer can process. To do this, the computer needs a "translator"—that is the driver. Many users assume Windows 10 auto-installs drivers for
Many users prefer the older, dedicated driver () because it often provides better stability and allows Windows to recognize the unit as a multi-channel device rather than a generic microphone.
| Problem | Likely Cause | Solution | |---------|--------------|----------| | Driver install fails / hangs | Old installer cached | Uninstall any previous UM2 driver via Control Panel → Reboot → Run installer as admin. | | Device shows "USB Audio Device" | Generic driver loaded | In Device Manager, right-click device → Uninstall device (check "Delete driver") → Reboot → Reinstall official driver. | | Crackling/popping audio | USB buffer underrun | Increase ASIO buffer size; disable USB selective suspend in Power Options. | | No sound from outputs | Wrong Windows default device | Right-click speaker icon → Sound settings → Choose UM2 as output. | | Blue screen (BSOD) on connect | Driver conflict with old audio drivers | Use the included uninstaller tool from Start Menu → "Behringer UM2 Driver Uninstall" → Reinstall clean. | | Microphone not detected (XLR) | Phantom power off | Press button on UM2 (for condenser mics). For dynamic mics, gain at 12 o'clock. | The result
| Step | Action | |------|--------| | 1 | Download the official driver ZIP file from Behringer. | | 2 | Right-click the ZIP → to a folder (e.g., Desktop). | | 3 | Run Setup.exe as Administrator (right-click → Run as administrator). | | 4 | Accept any Windows security warnings. | | 5 | Follow the installer prompts. Do not plug in the UM2 when asked – keep it disconnected. | | 6 | Complete the installation and restart your PC (mandatory). | | 7 | After reboot , connect the UM2 to a USB 2.0 port (avoid USB 3.0 hubs initially). | | 8 | Windows will detect the device and finalize driver binding. |