How To Open Maintenance Mode On Epson L3151 Jun 2026

If you are looking to reset the Waste Ink Pad Counter (a common reason for seeking Maintenance Mode), the hardware buttons alone are not enough. You need to force the printer into a specific "Service Mode" state that allows external software to communicate with the firmware.

The power light will flash, then all lights (power, ink, paper) will turn on and off. The printer will eventually enter a state where only the Power light stays on (not blinking normally). How to Open Maintenance Mode on EPSON L3151

Standard Maintenance options—like "Nozzle Check," "Head Cleaning," and "Ink Charging"—are accessible through your computer’s printer driver interface. These are safe, user-level functions designed for daily upkeep. If you are looking to reset the Waste

For most users, the standard interface is enough. But if you are troubleshooting a stubborn clog, resetting the ink pad counter, or performing a deep system reset, you will need to access the hidden "Maintenance Mode" (often referred to as "Service Mode"). The printer will eventually enter a state where

Note: If this tab is missing, you are likely using a generic Windows driver. Download the official, full-feature driver from the Epson Support Page to restore these options.

This is the most comprehensive "Maintenance Mode" where you can run nozzle checks, head cleanings, and "Power Cleaning". Open the on your computer. Go to Devices and Printers and find your Epson L3151 . Right-click the printer and select Printing Preferences . Click the Maintenance tab at the top.

Your Epson L3151 should now boot into standard user mode, and the error should be cleared.