Configure Dhcp On Zte Zxhn H267n Cyta Portable ⚡

If you are using a mesh Wi-Fi system or a dedicated router behind the ZTE H267N (in bridge or access point mode), you must disable DHCP to avoid IP conflicts.

In the same DHCP section, you can set which DNS servers are given to clients.

Configuring DHCP on the ZTE ZXHN H267N (Cyta) is straightforward once you know where to look. Whether you’re reserving an IP for a home server, adjusting lease times for a more responsive network, or disabling DHCP to integrate with advanced routing equipment, the web interface gives you full control. Configure DHCP on ZTE ZXHN H267N Cyta

If DHCP settings become corrupted:

To access the router's web interface, open a web browser (e.g., Google Chrome, Mozilla Firefox) and type the router's IP address in the address bar. The default IP address of the ZTE ZXHN H267N router is 192.168.1.1 . Log in to the router using the default admin username and password, which are usually printed on the underside of the router or in the user manual. If you are using a mesh Wi-Fi system

You will then need to re‑configure your Wi‑Fi and any port forwards.

If left blank, the router gives as DNS (relay mode) – fine for most users. Whether you’re reserving an IP for a home

Once logged in:

If you encounter persistent issues, contact Cyta support (132 from a Cyta line) or visit a Cyta customer service center. Alternatively, factory reset and start over with the steps in this guide.