Jny-lx1 Test Point Not Working Solution !!top!!

Do not pre-short for 10 seconds. Use the live plug method.

before performing the test point. Some specific software like jny-lx1 test point not working solution

| | Solution | |-------------|---------------| | Using a non-conductive tool | Use a fine metal tweezer, paperclip, or jumper wire. | | Poor contact | Clean the test points with isopropyl alcohol. Scrape off any oxidation gently. | | Shorting too early/late | Correct sequence: Short TP → Keep short → Plug USB cable to PC → Release short after 3-5 seconds. | | Shorting for too long | Release after PC detects "Huawei USB COM 1.0" to avoid boot loop. | Do not pre-short for 10 seconds