The organizes operation into three primary modes. Here is how to access each.
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | No fiber cable inserted | Insert fiber optic cable fully and lock lever. | | Er2 | Excess light (Over-saturated) | Reduce sensor gain or move fiber away from reflector. | | Er3 | Broken output wire | Short circuit protection engaged. Check load impedance. | | Er4 | Bank memory error | Reset to factory defaults via Pro Mode. | | Er5 | Communication error (when chained) | Check the interconnect cable between FS-N10 units. | | F4 | LED deterioration | Indicates the internal LED needs replacement (Contact Keyence). | fs-n10 manual
Before diving into the buttons and menus, it is essential to understand what the FS-N10 is and why it is a staple on production lines globally. The FS-N10 is a digital fiber optic amplifier produced by Keyence. It is designed to be used with a wide variety of fiber optic cables (both thrubeam and reflective types) to detect objects regardless of their material, color, or surface finish. The organizes operation into three primary modes
While this guide covers 80% of daily operations, you will need the full for advanced functions like automatic inter-teaching (multiple cascaded units) or analog scaling (for the FS-N10MN model). | | Er2 | Excess light (Over-saturated) |
The FS-N10 includes several simplified "one-click" calibration methods as detailed in the Quick Start Guide on Scribd: FS-N10 Series: Instruction Manual | PDF | Switch - Scribd
: Up to 16 expansion units can be connected to a single main unit. Light Source : High-power Red 4-element LED.