Point-n-measure — Digital Tape W5746 User Manual

Ensure you are holding the device at a 90-degree angle to the target wall. 6. Troubleshooting & Error Codes

For best results, use a reflective target (white wall, masking tape) on dark or glossy surfaces.

Use the dedicated function buttons to calculate square footage (area) or cubic feet (volume) after taking the necessary length, width, and height readings. Tips for Accuracy Point-N-Measure Digital Tape W5746 User Manual

Welcome to the future of distance measurement. The is a state-of-the-art laser distance measurer (LDM) designed to replace traditional tape measures with pinpoint accuracy, digital convenience, and one-button simplicity. Whether you are a professional contractor, a real estate agent, or a DIY home improver, this device allows you to measure distances, areas, and volumes with a single click—no physical tape, no awkward stretches, and no reading errors.

Hold the device level between measurements. Inaccurate tilt produces calculation errors. Ensure you are holding the device at a

Check if the battery is low. Low voltage can weaken the ultrasonic pulse.

Shows measurements, units (feet/meters), and calculation modes. Use the dedicated function buttons to calculate square

Used for aiming (Note: The laser is for targeting only; the ultrasonic sensor does the actual measuring).

A: Calculation overflow (number too large for display). Usually happens in volume mode beyond 9999 cubic units.

A: Yes, but soft surfaces add variability. Measure to a hard object placed on the surface when possible.