The is a “no-name” OEM product, meaning it does not have an official manufacturer support page. Drivers must be sourced via the chipset identifier or community repositories.
echo "blacklist r8188eu" | sudo tee /etc/modprobe.d/rtl8188eu-blacklist.conf echo "rtl8xxxu" | sudo tee /etc/modules-load.d/rtl8xxxu.conf sudo reboot
Before installing any driver, plug the adapter into a Windows PC and follow these steps: 950m wireless-n mini usb adapter driver model no ot-wua950nm
Finding the correct driver for the OT-WUA950NM Wireless-N Mini USB Adapter can be a challenge, especially since these generic high-gain adapters are sold under various brand names.
| Problem | Solution | |---------|----------| | | Disable antivirus temporarily. Uninstall any old Wi-Fi drivers. | | Device shows “Code 10” or “Code 43” | Unplug adapter → Uninstall device in Device Manager → Plug back in. | | Limited connectivity / disconnects | Go to Device Manager → Network adapter → Properties → Power Management → Uncheck “Allow computer to turn off this device”. | | Linux not detecting | Run lsusb . If chipset is RTL8188EU, blacklist r8188eu and use rtl8xxxu instead. | | Shows 802.11g speeds (54Mbps) | Change adapter settings: Control Panel → Network → Adapter properties → Configure → Advanced → 802.11n mode → Enable. | The is a “no-name” OEM product, meaning it
If you maintain an older system:
Verify with iwconfig – you should see wlan0 (or wlan1 ) with “Access Point: Not-Associated” until configured. | Problem | Solution | |---------|----------| | |
sudo apt update sudo apt install firmware-realtek sudo modprobe r8188eu
If your PC still doesn't see the device, try testing it on a different USB port. These high-power adapters sometimes require more juice than a front-panel USB port can provide.
Look for "Unknown Device" or "802.11n WLAN" under . Right-click it > Properties > Details tab. Select Hardware Ids from the dropdown.
For Ralink:
You need to login to perform this action.
You will be redirected in
3 sec
