Acer Ipisb-vr Rev 1.01 Front Panel Online

If you find the tiny pins too difficult (especially if you have large hands or poor eyesight), you can buy a or "Motherboard Front Panel Breakout Board" for under $10 online. Connect the cable to the Acer header once, and then plug your case wires into the labeled block away from the motherboard.

| Pin | Signal | Function | Polarity | |-----|----------------|-----------------------------|----------| | 1 | PLED+ | Power LED Positive | + | | 3 | PLED- | Power LED Negative | - | | 5 | PWR_BTN | Power Switch | N/A | | 7 | GND | Power Switch Ground | - | | 9 | NC (or +5V) | Not connected (varies) | N/A | | 2 | HDLED+ | HDD Activity LED Positive | + | | 4 | HDLED- | HDD Activity LED Negative | - | | 6 | RESET_BTN | Reset Switch | N/A | | 8 | GND | Reset Switch Ground | - | | 10 | NC (or KEY) | Not connected or missing pin| N/A | acer ipisb-vr rev 1.01 front panel

[Front Panel Audio Header] [USB 2.0 Headers] If you find the tiny pins too difficult

Looking at the header with the "missing pin" (Pin 10) on the top right: Pin Number Description Hard Drive LED Indicates disk activity (Polarity: 1+, 3-) 2 & 4 Power LED Case power light (Polarity: 2+, 4-) 5 & 7 Reset Switch Restarts the PC 6 & 8 Power Switch Turns the PC on/off 9 Reserved 10 Key Empty/Missing pin for orientation 11 - 14 Reserved Usually for internal speaker or chassis intrusion 🔌 Connection Best Practices 1. Identifying Pin 1 Identifying Pin 1