This is where most users fail. You need to tell the radio how to mix the three cyclic servos.
Once programmed correctly, turn off the radio, take a deep breath, engage Throttle Hold, power up the helicopter, walk 10 meters back, and flip off Hold. Your FS-i6 will hold that hover just as steady as radios twice its price.
: Access the System Setup menu by holding the OK button. Navigate to Type Select and choose Helicopter . flysky fs-i6 helicopter setup
Long-press OK to enter the menu, then select System setup .
: For collective pitch helicopters, you typically need to set the swashplate type (e.g., 120-degree swash mode) in the system menu to ensure proper mixing of aileron, elevator, and pitch servos. Channel Assignment : Channel 1 : Aileron Channel 2 : Elevator Channel 3 : Throttle (ESC) Channel 4 : Rudder Channel 6 : Pitch Binding the Receiver This is where most users fail
Once the receiver LED turns solid, the binding is complete. Remove the bind plug and restart both units. 3. Helicopter Specific Curves
: This defines the blade angle at various stick positions. For beginners, a Normal pitch curve typically ranges from -2 to +10 degrees to allow for stable hovering. Throttle Hold : Assign this to a switch (like Your FS-i6 will hold that hover just as
Helicopters are twitchy. Expo softens the center stick without losing maximum travel.
The FlySky FS-i6 is arguably the most popular entry-level 6-channel radio transmitter in the RC hobby. Known for its incredible value, reliability, and hackability, it is the go-to choice for pilots graduating from coaxial toys to single-rotor collective pitch (CP) helicopters. However, holding the radio is only the first step; programming it correctly is the difference between a machine that hovers like a dream and one that crashes immediately upon spool-up.