Olivetti Pr2 Plus Factory Reset Jun 2026

Note: This method varies slightly depending on the specific firmware revision installed on your mainboard. If this does not clear your issue, proceed to the Hardware Reset.

: The printer will print the current menu (usually "CONFIG"). Press STATION 1 to confirm or STATION 2 to skip through options until you find the parameter for defaults. olivetti pr2 plus factory reset

| Problem | Solution | |--------|----------| | | Your host software is sending the wrong emulation. Default is usually Olivetti ESC/P . Change to IBM PPDS or Epson FX via software. | | Paper doesn't feed correctly | Reset paper thickness sensor via PR2 Manager → "Calibration" → "Paper thickness reset". | | Stuck in "Check Cover" error | Open and firmly close the front cover. Reset may not clear mechanical flags. | | Baud rate mismatch | Default is 9600. Change your PC's COM port settings to match. | Note: This method varies slightly depending on the