Codes — Panasonic Kx-ta308 Programming
Last updated for firmware version 1.0-2.2. Always test programming changes on a single extension before rolling out system-wide.
Remember: When in doubt, the PROGRAM button is your escape key, and the default password is always a starting point—but change it immediately for security, especially if you use DISA features. panasonic kx-ta308 programming codes
Enables or disables the incoming telephone lines (CO 1–3). Sets lines to (standard) or (old rotary style). Class of Service Last updated for firmware version 1
These codes are used during daily operations and do not require the "Programming Mode" password. Call Pickup (Directed): + [Extension Number] Call Pickup (Group): Paging (All Extensions): Doorphone Access: (if a doorphone card is installed) Account Codes: + [Account Code] before dialing out. 4. Important Hardware Notes Extension 101: This is the master port. Most programming can be done from this port. Expansion: Enables or disables the incoming telephone lines (CO 1–3)
| Function | Programming Code | Default | Description | | :--- | :--- | :--- | :--- | | | 27 | 20 sec | How long a DISA call rings before disconnecting. | | Transfer Recall Timer | 44 | 30 sec | Time before a transferred call returns to the operator. | | Inter-digit Timer | 54 | 10 sec | Max time between dialed digits before disconnecting. | | Hold Recall Timer | 59 | 60 sec | Time before a held call rings back. |
Any user dials # + Bin Number (e.g., #01 ) from their PT.
This is the most common method for on-site adjustments. You must use a Panasonic proprietary telephone (e.g., KX-T7730, KX-T7330, or KX-T7030). A standard single-line telephone (SLT) cannot access the internal programming menus.