Manual Electroerosion Engemaq Edm 700 Jun 2026

Using the T-slotted table (spacing 20 mm), clamp your workpiece. Ensure it is level. For magnetic materials, use a fine-tooth chuck. Ground the workpiece directly to the work table using heavy copper braid.

The ENGEMAQ EDM 700 is designed as a heavy-duty, die-sinking EDM machine. It is engineered to bridge the gap between affordability and high-precision industrial performance. Below is an analysis of the critical specifications and construction features that define this model. manual electroerosion engemaq edm 700

To freeze specific parameters or isolate particular machining coordinates, toggle the manual index control. Manual mode locks the current Z-axis positioning depth and allows the operator to step through individual parameters. This is ideal for edge-finding, workpiece alignment, and electrode centering. LeanFind™ / Spark Tuning Mode Using the T-slotted table (spacing 20 mm), clamp

Set the reference voltage defining the physical distance between the electrode and the workpiece. Ground the workpiece directly to the work table

The system features three distinct operational workflows to accommodate different stages of the machining cycle. Automatic Mode

When the system initializes, it defaults to monitoring core parameters dynamically. In this mode, the machine sequences through target depths and adjusts the Z-axis servo feed rate automatically. This adjustment matches the real-time spark gap feedback, minimizing the need for operator intervention during roughing cycles. Manual Mode