Dixell Xw60ls Manual [hot] Here

Always disconnect power before wiring. Separate high and low voltage cables to prevent electrical noise interference.

If configured as dor (door switch): opening the door stops fans and displays dA after a delay (parameter doA ). Closing the door restarts normal operation.

Note: Always disconnect power before wiring. dixell xw60ls manual

A: The manual describes a "Hot Key" procedure. If you have a TTL (keypad programmer), you can download parameters from the old unit and upload them to the new one in 5 seconds.

Use the or DOWN arrows within 10 seconds to reach the desired value. Always disconnect power before wiring

: Operate only between 0°C and 60°C . Avoid areas with excessive moisture or corrosive gases.

The free-voltage digital input (terminals 12-13) can be configured as: Closing the door restarts normal operation

To access the programming mode, press and hold the button for more than 3 seconds. The display will show the first parameter code ( Hy ).