Hi-target V30 Plus Manual

| Problem | Likely Cause (Per Manual) | Solution | | :--- | :--- | :--- | | | Battery fully discharged or damaged. | Charge for 6+ hours. If no LED, replace battery (Model: V30 Plus Li-Ion 7.4V). | | Won't get "Fixed" | Base and Rover radio channels mismatch. | Check Radio LED: If flashing but no position, change channel on Rover. | | No Satellite signal | Firmware constellation settings are off. | Enter setup menu > GNSS Configuration > Enable GPS+GLONASS+BDS. | | Bluetooth disconnects | Interference or wrong COM port. | Forget device on tablet, re-pair. Ensure no other apps use the GNSS port. | | OLED screen blank | Screen saver time-out. | Press Fn button once to wake. If still blank, perform hard reset (see manual pg. 42). |

Used to turn the device on/off and switch between working modes. hi-target v30 plus manual

For more information and resources on the Hi-Target V30 Plus, please visit the manufacturer's website or download the following resources: | Problem | Likely Cause (Per Manual) |

One critical note: The printed manual may be outdated. Hi-Target releases firmware updates (V30 Plus Firmware v2.3.5 as of late 2024) that change menu layouts. | | Won't get "Fixed" | Base and

Assuming you are in the field and cannot open the full PDF, here is the most important data extracted from the official V30 Plus documentation.

Navigating Precision: An Overview of the Hi-Target V30 Plus Manual

Must be securely attached when using the device in "Internal Radio" mode to avoid damaging the transmitter. Battery Installation