dissociation to maximize the flux of reactive species available for cleaning.
# ------------------------------------------------------------------ # 4. Turn output on # ------------------------------------------------------------------ inst.write("OUTP ON") mks astron 2l manual
| Error Code | Symptom | Likely Cause | Fix | |------------|---------|--------------|-----| | | “OVP” (Over‑Voltage Protection) on LCD | Output voltage exceeds the set limit or a short to ground. | Reduce voltage setpoint, check load wiring, ensure proper grounding. | | E02 | “OCP” (Over‑Current Protection) | Current limit reached. | Increase current limit if safe, or check for a faulty load. | | E03 | “INT” (Internal Fault) | Power supply module failure. | Power‑cycle the unit; if it recurs, contact service. | | E04 | “COMM” (Communication Timeout) | Remote interface not responding. | Verify cable integrity, check baud rate/COM settings, restart the host PC. | | E05 | “TEMP” (Over‑Temperature) | Unit feels hot, fan not running. | Clean cooling vents, ensure ambient temperature < 45 °C, replace fan if needed. | dissociation to maximize the flux of reactive species
The is a robust, precision high‑voltage source that, when used according to its manual, offers excellent performance for a wide variety of research and industrial tasks. By keeping the following habits, you’ll get the most out of your instrument: | Reduce voltage setpoint, check load wiring, ensure