I--- Lambert Lx 24 Fi Instrukcia [repack] -

| Check | Action | |-------|--------| | Throttle trigger | Must spring back to idle | | Stop switch | Must kill engine instantly | | Chain brake (if saw) | Engage/disengage smoothly | | Muffler | No cracks, spark arrestor intact | | Fuel cap | Seals tight, vent open | | All screws/nuts | Tightened to specs |

If engine floods (wet spark plug), remove plug, pull rope 5x with choke off, dry plug, reassemble.

The instrukcija, or manual, is a vital resource that provides detailed information on the installation, operation, and maintenance of your I--- Lambert Lx 24 Fi. It's essential to read and understand the manual to ensure safe and efficient operation of your heating system. i--- Lambert Lx 24 Fi instrukcia

The unit has overheated. Wait for it to cool and attempt a reset. Air Pressure Switch / Flue Fault

| Problem | Possible Cause | Solution (refer to manual) | |---------|----------------|----------------------------| | Engine won’t start | No spark, flooded, stale fuel | Check plug, dry cylinder, replace fuel | | Starts then dies | Clogged carb jet, air filter blocked | Clean carb or filter | | Low power / bogging | Muffler screen clogged, wrong mix | Clean spark arrestor, refill correct mix | | Chain doesn’t move (if saw) | Chain brake on, worn sprocket | Release brake, replace sprocket | | Excessive vibration | Loose blade/bar, damaged AV mounts | Tighten, inspect rubber mounts | | Oil leak (if 4-stroke) | Drain plug loose, seal failure | Retighten, replace seal | | Check | Action | |-------|--------| | Throttle

If you smell gas, immediately turn off the equipment, open windows for ventilation, evacuate the area, and contact a qualified technician.

Story note: A solid click means good contact. No click? Check the fuse under the rubber cap. The unit has overheated

The is a dual-circuit convectional gas boiler manufactured by Baymak (Turkey) with a power output of 24 kW. This model is designed for wall mounting and features a closed combustion chamber, making it suitable for heating areas up to approximately 168 m2m squared Key Technical Specifications Heating Power: 24 kW (Minimum: 9.6 kW).