| LED Pattern | Meaning | Action | |-------------|---------|--------| | Solid green | 100–70% charge | Normal | | Blinking green (1 Hz) | 70–30% charge | Normal | | Blinking orange (1 Hz) | 30–10% charge | Charge soon | | Blinking red (1 Hz) | <10% charge | Charge immediately | | Fast blinking red (4 Hz) | Over-discharge | Replace/charge battery | | Solid red (with charger) | Charging in progress | Wait | | Solid green (with charger) | Charge complete | Remove from charger | | Rapid red/orange flash | Temperature fault | Cool down before use |
Uses a standard 70-pin quick connect/disconnect plug for main wiring. 2. Technical Specifications Specification Operating Voltage 12 to 24 VDC (+/- 50%) Operating Temperature -25°C to +70°C (-13°F to 158°F) Frequency Range 434/869 MHz (standard EU), others available Outputs 12 digital (ON/OFF) and 8 proportional (PWM or VC) Response Time Approx. 450 ms Safety Address 20-bit (over 1 million unique codes) 3. Installation & Setup hetronic bms-2 manual
(Replace xxx with version number: 001, 002, etc.) | LED Pattern | Meaning | Action |
In the world of industrial radio remote controls, reliability is not just a preference—it is a requirement. Heavy machinery, overhead cranes, and hydraulic systems depend on split-second signals to operate safely and efficiently. Among the most trusted pieces of hardware in this domain is the Hetronic BMS-2 system. 450 ms Safety Address 20-bit (over 1 million unique codes) 3