Manual — Viper Alarm 5x06 Installation

(+) Flex Relay Input 87A (key side if required). Pin 4 (Pink/White): (+) Ignition 2 / Flex Relay Output. Pin 5 (Red): (+) Fused 12V Ignition 1 Input.

The manual dedicates a full page to physical placement.

An alternative to a hardwired tachometer. It is programmed by remote starting the engine and letting it run for at least 30 seconds. viper alarm 5x06 installation manual

Before starting, ensure your vehicle is parked on a flat surface with the parking brake engaged.

The (12-pin connector) is the brain of the security system. According to the Viper 5x06 manual: (+) Flex Relay Input 87A (key side if required)

Drop it in the comments. If you’re looking for the PDF, start at The12volt.com or Directechs—and always double-check the revision date.

The Viper 5x06 dedicates 15 pages to programming. You have two methods: The manual dedicates a full page to physical placement

Let’s break down what the manual covers, where to find it, and the three mistakes that trip up most first-timers.