Canon — Service Tool V6000 Upd

If your printer model number has a "G" or "TS" followed by a 1, 2, or 3 in the hundreds place (e.g., G3010, TS3120), use V6000. If it has a 5 or higher (e.g., TS3520), you likely need V7000.

The tool can read and write to the EEPROM (Electrically Erasable Programmable Read-Only Memory). This provides a detailed report of the printer's history, including error logs and the total number of pages printed. 3. Service Mode Calibration

Clicking the wrong button (e.g., "Clear EEPROM" or "Ink Cartridge Reset" on the wrong tab) can erase critical factory calibration data, including head alignment values and serial numbers. The printer will never work again. Canon Service Tool V6000

(Ink Absorber Counter), which triggers an error when the printer's internal sponges are theoretically full. Key Functions Waste Ink Counter Reset

Navigate to the "Main" tab. Look for the "Clear Ink Counter" section. Select "Main" and click "Set." If your printer model number has a "G"

Section 6 of Canon’s warranty explicitly excludes "damage caused by unauthorized service tools." Using V6000 leaves a digital footprint (the EEPROM logs "service mode entered" without a Canon technician ID).

Clearing the 5B00 or 1700 error codes when the internal ink pads are reported as full. This provides a detailed report of the printer's

Triggering advanced cleaning cycles to clear stubborn clogged nozzles.