Chevron Digital Timer Instructions (EXCLUSIVE)

to choose which days the program should run (e.g., every day, weekdays only, or a specific day). Set "ON" Time

Press Prog repeatedly until you see the unwanted program (e.g., "4 OFF"). Press and hold + and - simultaneously for 3 seconds. The screen will show "--:--". Press Prog to save the blank slot.

Your timer requires a rechargeable battery backup (often Ni-MH). If unplugged for >72 hours, memory is lost. Solution: Plug the timer into a live outlet for 10-12 hours to recharge the internal battery. chevron digital timer instructions

: Connect the timer to a power outlet for at least 15–30 minutes to charge the internal backup battery if it has been stored for a long time.

Setting up a Chevron digital timer (often identified as model to choose which days the program should run (e

After programming your times, press the RND button. "RND" will appear on screen. This is ideal for vacation security.

Press the ON/AUTO/OFF button to return to the main clock screen. 4. Selecting Operating Modes The screen will show "--:--"

Press the + button again to reach "1 OFF" and repeat the steps above to set the time the device should deactivate.

When the LCD clock ticks to your programmed ON minute, you should hear a soft click inside the timer. That click confirms the relay has engaged and power is flowing.

AM/PM confusion or incorrect day setting. Solution: Re-enter Clock mode. Ensure "12:00" is shown as "12:00 PM" for noon, not midnight.