Nokia Ta 1380 Flash File Jun 2026

| Error Message | Cause | Solution | |---------------|-------|----------| | ERROR: S_BROM_CMD_STARTCMD_FAIL | Driver not installed correctly | Reinstall MTK USB drivers and reboot PC. | | STATUS_BROM_CMD_SEND_DA_FAIL | Phone not in correct mode | Remove battery, wait 10 sec, reinsert and try again. | | PMT changed for the ROM | Previous flash leftover partitions | In SP Flash Tool, go to Format → Flash entire ROM → then Download. | | Device turns off during flashing | Low battery or loose cable | Fully charge battery and use a different USB cord. |

Highlight all files from your downloaded firmware folder and select them. Connect Device: Power off the phone completely. nokia ta 1380 flash file

Never try to flash a TA-1310 or TA-1376 file on a TA-1380. Even though they look similar, the internal hardware IDs differ. | Error Message | Cause | Solution |

Unlike some devices that use free USB tools, the TA-1380 often requires specialized boxes or dongles like Pandora Box or UnlockTool for a successful flash. | | Device turns off during flashing |