Trendnet Tew-638apb Default Ip Patched

: Unplug the power adapter, wait 15 seconds, and plug it back in to restart the device.

Unlike standard home routers which typically use 192.168.0.1 or 192.168.1.1 , the TEW-638APB uses 192.168.0.10 to avoid conflicts with your main router. This static default IP is hard-coded into the device’s firmware.

The factory-default IP address assigned to the wireless access point is: trendnet tew-638apb default ip

: IEEE 802.11n (up to 300 Mbps), backward compatible with 802.11b/g.

To enter the admin dashboard, use the following factory default settings: : 192.168.10.100 Default Username : admin Default Password : admin Default SSID (Wi-Fi Name) : TRENDnet638 How to Access the Admin Page : Unplug the power adapter, wait 15 seconds,

Unlike many devices that have a blank password, the TEW-638APB uses admin for both fields. They are case-sensitive, so use lowercase letters.

: Supports Access Point, AP Client (wireless adapter), WDS (Wireless Distribution System), and Repeater modes. The factory-default IP address assigned to the wireless

If you have another device on your network also using 192.168.0.10 (rare, but possible), disconnect the AP from your network and connect directly via Ethernet as described in Step 2 above.