(up to 500MHz for digital depending on channel count) and the Number of Samples to determine the capture duration. to begin capturing data from your circuit. Key Features to Utilize Saleae Logic Pro 8 - sigrok
On Windows, you may need to use Zadig to replace the default Saleae driver with the WinUSB driver for PulseView to recognize the hardware. How to Get Started Using sigrok analyzers with Logic 2 - Extensions - Saleae
Good news: The Saleae Logic Pro 8 is fully supported by the libsigrok library. Bad news: You lose the high-speed streaming mode found in the official software. For 99% of SPI, I2C, UART, and simple parallel bus decoding, it works flawlessly. For high-speed analog or long captures at 100 MHz, stick with the official app. pulseview saleae logic pro 8
The short answer is
The Saleae Logic Pro 8 Go to product viewer dialog for this item. (up to 500MHz for digital depending on channel
Up to 500 MS/s for digital signals (on up to 4 channels) and 50 MS/s for analog. Logic Levels: Supports a wide range from 1.2V to 5.5V .
Switching between PulseView and Saleae’s native software requires re-flashing the firmware . Saleae devices do not have onboard permanent firmware; the host PC uploads it each time. If you use PulseView, it uploads the open-source firmware. To return to Saleae Logic, you must unplug, restart the Saleae software, and replug. This is not dangerous, but it is annoying for daily swapping. How to Get Started Using sigrok analyzers with
The Logic Pro 8 uses a high-performance FPGA to handle the high sample rates. When the device is plugged in, it presents itself to the computer as a generic USB device. The Saleae software uploads a specific firmware bitstream to the FPGA to activate the logic analyzer functions.