Gyroor G1 Hoverboard Manual -

| | LED Indicator | Meaning | Solution | | :--- | :--- | :--- | :--- | | Continuous rapid beep | Flashing red rear light | Low battery (<15%) | Charge immediately. | | 3 short beeps, pause, repeat | Front lights flash | Board not level / Calibration lost | Perform the calibration in Section 4. | | 1 long beep, 2 short beeps | Left side blinking | Sensor plate error (Left foot) | Check for debris under footpad. Restart. | | 1 long beep, 3 short beeps | Right side blinking | Sensor plate error (Right foot) | Same as above. | | Constant loud beep (alarm) | No lights | Overheat or overcurrent | Stop riding. Let it cool for 30 mins. | | 5 short beeps, then off | Speed wobble | Tilt-back activated (safety) | You leaned too fast. Slow down. |

Dismounting: Always step off toward the back of the board, one foot at a time. Stepping off forward can cause the board to roll into your ankles. APP INTEGRATION AND FEATURES gyroor g1 hoverboard manual

. It warned him about the "Self-Balancing Technology"—a fancy way of saying the board would stand at attention the moment he pressed the chrome power button. He skipped to the Safety Checklist | | LED Indicator | Meaning | Solution

Beeping while Riding: This is often a speed warning. Slow down immediately to regain control. Restart

The manual includes a labeled diagram showing: