Create Symantec Netbackup 7.5 Bare Metal Restore Boot Cd Free Page

NetBackup™ Bare Metal Restore™ Administrator's Guide - Veritas

Right-click → Select New Boot Image .

| Error Message | Root Cause | Solution | | :--- | :--- | :--- | | | The boot CD lacks the NDIS driver for your NIC. | Recreate the CD. During creation, manually inject the correct 32-bit or 64-bit .INF driver from the hardware vendor. | | "Failed to connect to master server (status 58)" | Network misconfiguration. The CD uses a different subnet or VLAN than the master server. | Boot the CD, press F8 for a command prompt, and use ipconfig /all . If static IPs conflict, use DHCP or re-create the CD with corrected static settings. | | "Unable to locate disk layout" | The target disk is smaller than the original backup’s disk, or the partition table type (MBR vs. GPT) mismatches. | Replace the target disk with one of equal or larger size. Ensure BIOS boot mode matches the original hardware. | Create Symantec NetBackup 7.5 Bare Metal Restore Boot CD

We will cover two primary methods: using the (GUI) and the bmrsetupcd command-line utility. During creation, manually inject the correct 32-bit or