Once these steps are complete, your is ready to handle thousands of labels without a hitch. Bookmark this guide, because you will appreciate the troubleshooting section the next time Windows updates mess with your settings.
Most users fail because they connect the USB cable before installing the software. Proline Q800 Thermal Printer Drivers Download
. In many cases, standard Xprinter 80mm thermal receipt printer drivers from Xprinter's Global Site are compatible. Printer Specifications Print Method Direct Thermal Print Speed 200mm/sec to 260mm/sec Interfaces USB + Serial + LAN (3-in-1) Paper Width 79.5 ± 0.5mm (80mm standard) Auto Cutter Integrated partial/full auto-cutter Compatibility Windows (XP/7/8/10/11), Linux, and OPOS Step-by-Step Installation Guide Proline XP-Q800 Thermal Receipt Printer - FirstShop Once these steps are complete, your is ready
This POS support center provides direct links for the Q800 series drivers and manuals. Installation Steps Installation Steps | Error Message | Likely Cause
| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | | Windows Update overwrote the driver. | Reinstall the Proline driver; disable automatic driver updates. | | “Out of paper” but paper is loaded | Gap sensor not calibrated. | Perform the FEED button calibration (see Part 6). | | Printer prints half a label then stops | Software is sending a page break for letter size (8.5x11) but you have 4x6 labels. | Set custom paper size to 4x6 in both driver AND your shipping software. | | Garbled, strange characters | Wrong driver language (e.g., using a POS receipt driver). | Remove printer and reinstall using the TSPL or ZPL driver option. | | USB not detected | Windows plugged the printer in before driver was installed. | Unplug USB > Delete printer from Devices > Reboot > Reinstall driver > Plug USB when prompted. |
From the dropdown menu in the installer, select or if "Proline" is not listed.
The Proline Q800 (often referred to as the Proline Pinnpos FLY-Q800
Once these steps are complete, your is ready to handle thousands of labels without a hitch. Bookmark this guide, because you will appreciate the troubleshooting section the next time Windows updates mess with your settings.
Most users fail because they connect the USB cable before installing the software.
. In many cases, standard Xprinter 80mm thermal receipt printer drivers from Xprinter's Global Site are compatible. Printer Specifications Print Method Direct Thermal Print Speed 200mm/sec to 260mm/sec Interfaces USB + Serial + LAN (3-in-1) Paper Width 79.5 ± 0.5mm (80mm standard) Auto Cutter Integrated partial/full auto-cutter Compatibility Windows (XP/7/8/10/11), Linux, and OPOS Step-by-Step Installation Guide Proline XP-Q800 Thermal Receipt Printer - FirstShop
This POS support center provides direct links for the Q800 series drivers and manuals. Installation Steps
| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | | Windows Update overwrote the driver. | Reinstall the Proline driver; disable automatic driver updates. | | “Out of paper” but paper is loaded | Gap sensor not calibrated. | Perform the FEED button calibration (see Part 6). | | Printer prints half a label then stops | Software is sending a page break for letter size (8.5x11) but you have 4x6 labels. | Set custom paper size to 4x6 in both driver AND your shipping software. | | Garbled, strange characters | Wrong driver language (e.g., using a POS receipt driver). | Remove printer and reinstall using the TSPL or ZPL driver option. | | USB not detected | Windows plugged the printer in before driver was installed. | Unplug USB > Delete printer from Devices > Reboot > Reinstall driver > Plug USB when prompted. |
From the dropdown menu in the installer, select or if "Proline" is not listed.
The Proline Q800 (often referred to as the Proline Pinnpos FLY-Q800