Artcam 2008 Pro =link= [ 99% Plus ]

ArtCAM 2008 Pro does not natively support GRBL (the firmware on most cheap 3018 routers and Arduino-based CNCs). You will need to select "Generic G-code (MM)" and manually edit the header to add G21 (millimeters) and G90 (absolute positioning). Some users report that the 2008 post-processor outputs line numbers ( N100 , N110 ) that confuse modern GRBL, requiring a simple find/replace in Notepad.

: The software supports a wide range of 3D file formats, including STL , OBJ , and 3DS , which are converted into reliefs upon import. artcam 2008 pro