Pilot Safe Sae 1610 Instructions Here

Method B – Quick set (no internal button):

Inside the box, you should find:

The factory default code for the SAE 1610 is often or 1-5-9-0 . For security, change this immediately. pilot safe sae 1610 instructions

: If the batteries are dead or not yet installed, locate the emergency override keyhole (usually hidden behind a small plastic cover near the keypad) . Method B – Quick set (no internal button):

The Pilot SAE-1610 is a digital electronic safe commonly used in homes, offices, and hotels for securing valuables. This guide provides comprehensive instructions for operating, programming, and maintaining your Pilot Safe SAE-1610. 1. How to Open Your Pilot Safe SAE-1610 To unlock your safe using the electronic keypad: The Pilot SAE-1610 is a digital electronic safe

: Press and hold the button until you hear a beep or see a light signal. Enter New Code : Type in your new desired code (typically 3–8 digits). : Press the key to finalize the change.

Drill, 1/2" masonry or wood bit (depending on surface), wrench.