Arduino Tutorial 64 !exclusive!

void loop() // Example: Count from 0 to 99 repeatedly for (int number = 0; number < 100; number++) int tens = number / 10; // Tens digit int ones = number % 10; // Ones digit

Here is the recommended connection for Arduino Tutorial 64: arduino tutorial 64

// Display the two digits for 500 milliseconds total for (int i = 0; i < 50; i++) // 50 cycles * 10ms = 500ms displayDigit(0, tens); // Show tens digit delay(5); // Keep it on for 5ms displayDigit(1, ones); // Show ones digit delay(5); // Keep it on for 5ms void loop() // Example: Count from 0 to

void loop() unsigned long currentMillis = millis(); // Show tens digit delay(5)

void setup() // Set all segment pins as outputs and turn them OFF for (int i = 0; i < 8; i++) pinMode(segPins[i], OUTPUT); digitalWrite(segPins[i], LOW);

Multiplexing in works like this:

Map complex hex codes to simple, human-readable commands like "Power On" or "Volume Up." From Theory to Mastery