| Symptom | Likely Fix | |---------|-------------| | No power, fans spin then stop | Check 4-pin CPU power connector. | | USB ports not working in BIOS | Disable "Legacy USB Support" → reboot. | | M.2 SSD not detected | Set SATA mode = AHCI, disable CSM. | | Beep codes on startup | 3 long beeps = RAM issue; 1 long, 2 short = GPU. |
By far, the most common reason people seek the is to figure out the front panel connectors. The G3-710 uses a proprietary, all-in-one block, but if you are replacing the case, you need the pinout. acer predator g3-710 motherboard manual
Use this as a text-based map:
For users performing repairs or case swaps, the proprietary front panel header layout is as follows: Acer Community Top Row (Right to Left): 2 pins for , followed by 2 pins for Bottom Row (Right to Left): 2 pins for (+ then -), followed by 2 pins for Manuals & Drivers | Symptom | Likely Fix | |---------|-------------| |
| Feature | Specification | | :--- | :--- | | | Micro-ATX (proprietary mounting holes) | | CPU Socket | LGA 1151 (supports 6th & 7th gen Intel Core - i3, i5, i7) | | Chipset | Intel H110 or B150 (varies by sub-model) | | RAM Slots | 2 x DDR4 DIMM (max 32GB, 2133MHz native) | | PCIe Slots | 1 x PCIe x16 (for GPU), 1 x PCIe x1 | | Storage | 4 x SATA 6Gb/s, 1 x M.2 slot (2280, SATA/PCIe x2 NVMe) | | Rear I/O | 4 x USB 3.0, 2 x USB 2.0, HDMI, DVI-D, RJ45, 3x audio jacks, PS/2 | | Power Connector | 24-pin ATX + 4-pin CPU (standard) | | BIOS | Aptio V (UEFI) - limited overclocking features | | | Beep codes on startup | 3