Acer Dsv 1340 Projector

Check the main sticker on the bottom of the projector — the real model number is usually printed as or “X1340WH” .

2,700 ANSI Lumens under standard operating configurations. Contrast Performance: 10,000:1 full on/off dynamic ratio.

If you opened the projector and saw on a PCB or label, that might be: acer dsv 1340 projector

After replacing the lamp, the projector still shows "Lamp expired — replace" message. Solution: Hold MENU + POWER for 10 seconds (on some P1340W units) or use the hidden reset via Settings > Lamp Reset .

To get the correct long story (repair guide, specs, firmware, lamp type): Check the main sticker on the bottom of

could be:

With a 20,000:1 contrast ratio (dynamic), the DSV 1340 handles black levels better than older SVGA models. Whites are searingly bright, and dark grays are relatively deep. Acer’s ColorBoost technology helps maintain natural skin tones and vibrant graphics, though color purists will notice a slight green tint common in high-lumen DLP business projectors. If you opened the projector and saw on

One of the most critical metrics for any business projector is brightness. The DSV 1340 typically features a brightness output ranging between . This level of luminosity is significant because it allows the projector to function in environments that are not pitch black.