The default password for an depends on the software mode it is running, but for most out-of-the-box setups, use the credentials below. 🔑 Default Login Credentials Username: admin Password: The Serial Number of the device.
| Symptom | Likely Cause | Solution | |---------|--------------|----------| | admin / admin rejected via SSH | AP already configured or joined to a controller | Perform factory reset (see Part 4) | | No web UI on port 80/443 | AP in campus mode, not Instant | Use console cable or check controller | | Password not working after power cycle | AP retrieved saved config from controller | Disconnect from network (controller may reprovision it) and reset | | Login works but no CLI access | Role-based access control (RBAC) limiting commands | Need full admin privileges – factory reset | Aruba Networks AP-515 -APIN0515- Default Password
If the AP was previously connected to a network with a DHCP server, it may have automatically downloaded a configuration from Aruba Central or a Virtual Controller. In this case, the default password has been overwritten. You will need to the device (hold the reset button for 10+ seconds using a paperclip). The default password for an depends on the