Narco Escort Ii Installation Manual -

Proper leveling is necessary during installation to ensure the internal VOR/LOC indicator provides accurate tracking. If the unit is not horizontal, the VOR needle may show inaccuracies.

Here is the critical pinout decoded for the layman: Narco Escort Ii Installation Manual

Narco Escort II Installation Manual: Complete Step-by-Step Guide Proper leveling is necessary during installation to ensure

The following is the standard wiring configuration for the Narco Escort II. Note: Always verify pin locations against the physical markings on your specific connector. Description Airframe Ground 2 +13.75 VDC Main Power Input 3 Connect to Panel Lighting Bus 4 Speaker Out 4-8 Ohm Speaker Output 5 Pilot Microphone Input 6 Push-to-Talk (PTT) Switch 7 Headset Audio 15 Center conductor of RG-58 Coax 16 NAV Ant Gnd Shield of RG-58 Coax 23 Center conductor of RG-58 Coax 24 COM Ant Gnd Shield of RG-58 Coax 4. Antenna Installation Note: Always verify pin locations against the physical