If Vin is positive (say 12V), Vgs = -12V → MOSFET conducts. If Vin is reversed (-12V), Vgs = +12V → MOSFET blocks.
The datasheet lists a typical Vgs(th) of -2V to -4V. This is the voltage where the FET begins to conduct (at 250uA). rely on this for full saturation. For an Rds(on) of 60 mΩ, you need Vgs = -10V. ap9640 datasheet
A datasheet is a technical document that provides detailed information about a specific electronic component, including its characteristics, specifications, and performance. The AP9640 datasheet is essential for designers and engineers to: If Vin is positive (say 12V), Vgs = -12V → MOSFET conducts
The AP9640 is typically available in the surface-mount package. Looking at the flat side with the text facing you (pins down): If Vin is positive (say 12V)
If Vin is positive (say 12V), Vgs = -12V → MOSFET conducts. If Vin is reversed (-12V), Vgs = +12V → MOSFET blocks.
The datasheet lists a typical Vgs(th) of -2V to -4V. This is the voltage where the FET begins to conduct (at 250uA). rely on this for full saturation. For an Rds(on) of 60 mΩ, you need Vgs = -10V.
A datasheet is a technical document that provides detailed information about a specific electronic component, including its characteristics, specifications, and performance. The AP9640 datasheet is essential for designers and engineers to:
The AP9640 is typically available in the surface-mount package. Looking at the flat side with the text facing you (pins down):