How To Open Fastboot Mode On Huawei P Smart 2019 -

Once you are in Fastboot Mode on the Huawei P Smart 2019, you might notice that the screen looks static. Unlike a

If you need to leave this mode and restart your phone normally: How to Open Fastboot Mode on HUAWEI P Smart 2019

| Issue | Solution | |-------|----------| | Phone boots normally instead of Fastboot | Ensure you held before pressing Power. Try again with faster timing. | | Fastboot screen appears, but PC doesn't detect it | Install/update Huawei USB drivers . On Windows, check Device Manager for "Android" or "Kedacom" device with a yellow exclamation. | | fastboot devices shows nothing | Use a different USB port (USB 2.0 preferred). Try a different cable. Reinstall drivers. | | "Waiting for device" in command prompt | Run command prompt as Administrator (Windows). On Linux/macOS, use sudo fastboot . | Once you are in Fastboot Mode on the

This means your bootloader is still secured by HUAWEI's factory settings. | | Fastboot screen appears, but PC doesn't

Plug your phone into your computer and "Allow USB Debugging" if a prompt appears on the phone screen.

Once you have completed your flashing or troubleshooting, you need to exit Fastboot. Do not just pull the battery (you can't on the P Smart 2019).

Your Power button might be stuck physically, or the phone is detecting a short press as a long press. Clean the button with compressed air. If not, your battery logic board may be faulty.