Use this if you are operating on a laptop or a desktop where Intel VMD is enabled in the BIOS. It is heavily used for RAID arrays and NVMe mapping.
Move the extracted folder onto your bootable Windows USB flash drive. Step 2: The Windows Setup Phase Boot into your Windows installation media. Proceed until you reach the disk selection screen. Click on at the bottom left of the window. F6flpy-x64-non-vmd Zip
The driver folder does not contain a compatible *.inf file for your hardware configuration. Solution: Ensure you downloaded the x64 version. If your CPU is older than 8th-gen Intel, try the standard F6flpy-x64.zip instead. Also, check your BIOS: If VMD is forced "On," the non-vmd driver may reject it. Go into BIOS > Advanced > Storage > VMD Configuration and disable VMD if you are using the non-vmd driver. Use this if you are operating on a
| Driver Package | When to use | |---|---| | F6flpy-x64-vmd.zip | Intel VMD in BIOS (default on many 11th–14th Gen systems) | | F6flpy-x64-non-vmd.zip | Intel VMD disabled in BIOS (or older platforms without VMD) | Step 2: The Windows Setup Phase Boot into
Download from :
F6flpy-x64-non-vmd.zip is Intel’s legacy-named driver to make storage drives visible during Windows installation . It is essential for many modern Intel systems where Windows Setup cannot natively see NVMe SSDs. Choose the correct version (VMD vs. non-VMD) based on your BIOS setting, and load it during the “Load driver” step of Windows installation.