, it relies on a specific USB driver to translate physical pressure on the screen into mouse cursor movements. ComX Computers Primary Driver Requirements The Proline POS 137 typically requires a dedicated USB resistive touch driver
Windows is using the generic HID driver instead of eGalax’s multi-touch filter. Solution: proline pos 137 touch drivers
To avoid future driver failures in a production POS environment: , it relies on a specific USB driver
Operating systems like Windows (which most POS systems run on) usually have generic drivers for standard mice and keyboards, but they rarely have native support for specific touch controllers. A: Likely no
A: Likely no. Perform a “power drain” – unplug the POS 137 from power and USB for 60 seconds, then reconnect. This resets the controller’s EEPROM.
If you continue to experience erratic touch behavior after reinstalling the driver, the issue may be hardware-related: a loose internal USB ribbon cable or a failing touch controller. In that case, contact Proline’s hardware support with your driver diagnostic log (found in C:\ProgramData\eETI\Logs ).