| Terminal | Label | Function | Wire gauge | |----------|-------|----------|------------| | L, N | Power input | 100-240V AC 50/60Hz | 1.5 mm² | | U, V, W | Motor output | 3-phase up to 2.2kW | 2.5 mm² | | +10V, AI1, GND | Analog input | 0-10V or 4-20mA | Shielded 0.5 mm² | | D11, D12, COM | Digital inputs | Dry contact | 0.75 mm² | | RA, RB, RC | Relay output | 250V AC @ 3A | 1.0 mm² |
:
The HLP-C103 is a reliable workhorse, but its versatility depends entirely on correct configuration. Whether you are tuning acceleration ramps (Pn-03), diagnosing an overcurrent fault (E-01), or setting up PID for a pumping station, the should never be far away. hlp-c103 manual
Because it is often manufactured as a generic "white-label" component in the electronics market, physical manuals are rarely included in the packaging. This is a common pain point for users, but the device operates on standard principles shared by many controllers in the C100 series family.
Single-phase 200–240V AC or three-phase 380–480V AC options. | Terminal | Label | Function | Wire
Inverter output terminals connected directly to the door operator motor.
Beyond basic operation, the HLP-C103 manual describes several powerful features: This is a common pain point for users,
Analog reference inputs for external potentiometer speed adjustments. Relay Output (FA/FB/FC): Fault indicator output loop. 3. Advanced Parameter Programming HLP-C100 Series Operating Manual - NEWPAGES
is a compact variable frequency drive (VFD) from the Holip HLP-C100 series
If the device trips, refer to these common alarm codes on the LCP: E.07 / E.08 : Over-voltage or under-voltage. E.09 / E.10 : Motor or drive overload.
