Xerox 010-321

If you are a technician, system administrator, or office manager responsible for a mid-to-high-volume Xerox printer or multifunction device (MFD), you have likely encountered the cryptic error code: .

A technician will perform a , check the AC Drive Board , and measure the resistance of the fuser lamp. xerox 010-321

Many Xerox models have an interlock switch on the fuser access door (usually on the left side or rear panel). If the door is slightly ajar, the printer may disable power to the fuser, causing a temperature fault. If you are a technician, system administrator, or

: Turn the printer off, wait at least 60 seconds, and turn it back on to reset the electronics. Clear Obstructions Power off the printer and wait 5–10 minutes to allow the fuser to cool. Open the front door and pull out the Area 2 drawer. If the door is slightly ajar, the printer