To the uninitiated, it was just a grey box with blinking lights. To Elara, it was the gatekeeper.
/ip firewall mangle add chain=prerouting src-address=192.168.88.100/32 action=mark-routing new-routing-mark=via-v2ray /ip route add dst-address=0.0.0.0/0 gateway=192.168.88.2 routing-mark=via-v2ray
The city's internet was a fragmented landscape—walled gardens and digital checkpoints that stifled the flow of information. Elara’s mission was simple but dangerous: keep the data free. For months, she’d relied on standard VPNs, but the censors' "Great Eye"—a sophisticated Deep Packet Inspection (DPI) system—had begun sniffing them out, dropping her connections one by one. She needed something invisible. She needed v2ray mikrotik
This write‑up covers the :
A USB drive is highly recommended for container storage to prevent wearing out the router's internal flash memory. Phase 1: Enable Container Mode To the uninitiated, it was just a grey
/routing table add name=to-v2ray fib /ip route add dst-address=0.0.0.0/0 gateway=172.17.0.2 routing-table=to-v2ray Use code with caution. Copied to clipboard
Bind container port 1080 to router’s IP. Elara’s mission was simple but dangerous: keep the
MikroTik cannot run V2Ray natively. The most stable production setup is: