If your phone is functioning, you can access this via Settings > System Update. If you are dealing with a bootloop:
If your Realme C2 is stuck on the Realme logo (bootloop) or shows a black screen but vibrates, you likely have a "soft brick." In this state, the phone cannot boot into the operating system to receive a standard OTA update. Connecting to a PC might not work if drivers are missing or the USB port is damaged. The SD card method allows you to flash the firmware from the device’s recovery mode, bypassing the need for a working OS. Firmware Realme C2 Via Sd Card-
Flashing firmware carries inherent risks, including potential data loss or device bricking. The author assumes no responsibility for any damage resulting from following this guide. Always ensure you have a verified backup of your data. If your phone is functioning, you can access
: Power off the device, then hold the Power and Volume Down buttons simultaneously until the Realme logo appears. The SD card method allows you to flash
When you place the firmware file on an SD card, boot into recovery, and select “Install from storage device” or “Software Update” , the system overwrites the existing corrupt software with a fresh copy from the card.